Product Categories
Contact Us

Chongqing Bishan Jiecheng Plastic Co., Ltd.

Add:Shiyang 3rd Road, Qinggang Street,Bishan District,Chongqing,China

E-mail:sales@cqjiecheng.com

Office:+86-23-41802788

Fax:+86-23-41801788


News

Laminating Machine Improve Production Efficiency And Reduce Production Costs

What is the principle of automatic correction device for Laminating Machine ? Which sensors (ultrasonic, photoelectric, pneumatic, etc.) are commonly used? What is the difference between these sensors?

The automatic correction device is a system that automatically detects and controls the lateral position of the tape. It is through the sensor to detect the edge or edge of the tape (substrate), the use of the control system to calculate the lateral position of the fluctuations or errors, and issued an error correction instructions, by the implementing agencies to correct the horizontal position of the tape.

Commonly used sensors are ultrasonic sensors, photoelectric sensors and pneumatic sensors. Ultrasonic sensors are available for all materials and are generally used for heel. Photoelectric sensors are mainly used for the line, but can not be used in the transparent substrate with the edge. Pneumatic sensors are suitable for all materials with the edge, but the general accuracy is low.

Generally speaking, the Laminating Machine  refers to a kind of compound equipment in home textile, garment, furniture, automobile interior and other related industries. It is mainly used for all kinds of fabrics, leather, film, paper and sponge. Process. It is divided into plastic composite and non-adhesive compound, there are plastic composite is divided into water glue, PU oil glue, hot melt adhesive, etc., non-adhesive composite process for direct bonding between the material or flame burning composite. At present, the complex national standard has been implemented.

use:

1. Application in the cast film, breathable film and non-woven materials such as glue on the paste. Applicable to baby diapers, medical protective clothing, food desiccant bags and other industries products.

2. Application of non-woven materials such as rubber compound (paste) and cutting processing. Applicable to home air purifier, car air purifier, air conditioning, refrigerator and other matching filter processing.

The basic purpose of the complex

1. Application in the cast film, breathable film and non-woven materials such as glue on the paste. Applicable to baby diapers, medical protective clothing, food desiccant bags and other industries products.

2. Application of non-woven materials such as rubber compound (paste) and cutting processing. Applicable to home air purifier, car air purifier, air conditioning, refrigerator and other matching filter processing.

Generally speaking, the Laminating Machine  refers to a kind of compound equipment in home textile, garment, furniture, automobile interior and other related industries. It is mainly used for all kinds of fabrics, leather, film, paper and sponge. Process. It is divided into plastic composite and non-adhesive compound, there are plastic composite is divided into water glue, PU oil glue, hot melt adhesive, etc., non-adhesive composite process for direct bonding between the material or flame burning composite. At present, the complex national standard has been implemented.

1, you can give two layers of material at the same time glue on the paste, the compound fastness better. Can also be used to three layers of thin material one-time glue on the paste, improve production efficiency and reduce production costs.

2, double plastic slot with a combination of high temperature with a high temperature mesh with pressure, so that the composite material and dryer full contact to improve the drying effect, so that after processing the material soft, washable, fastness.

3, the machine with a network of automatic infrared adjustment device, can effectively prevent the network belt deviation, to extend the life of the network belt.

4, the machine's heating system is divided into two groups, the user can choose according to the need for heating (a group or two groups), can effectively save energy and reduce production costs.

5, according to the need to match the DC motor or inverter linkage, so that the machine has a better handling.